Removing And Installing The Cowling And Panel - Yamaha Neo's 4 2018 Owner's Manual

Removing and installing the
cowling and panel
The cowling and panel shown need to
be removed to perform some of the
maintenance jobs described in this
chapter. Refer to this section each time
the cowling or panel needs to be re-
moved and installed.
1. Cowling A
2. Panel A
Cowling A
To remove the cowling
1. Remove the screws, and then pull
the cowling off as shown.
Periodic maintenance and adjustment
EAU18743
1. Cowling A
2. Screw
EAUM3990
2. Disconnect the headlight coupler
and the auxiliary light coupler.
1. Headlight coupler
2. Auxiliary light lead coupler
To install the cowling
1. Connect the couplers.
2. Place the cowling in the original
3. Install the screws.
Panel A
To remove the panel
Remove the screw, and then pull the
panel off as shown.
6-6
position.
6
EAU19282