Operation; Starting The Engine - Yamaha KODIAK 700 YFM70KDXH Owner's Manual

EBU19882
EBU19902
Read the Owner's Manual carefully before riding
the ATV. If there is a control or function you do not
understand, ask your Yamaha dealer.
EWB00632
WARNING
Read the Owner's Manual carefully to become
familiar with all controls in order to help pre-
6
vent any loss of control, which could cause an
accident or injury.
EBU34161

Starting the engine

ECB00151
NOTICE
See the "Engine break-in" section on page 6-4
prior to operating the engine for the first time.
1. Turn the key to "
switch to " ".
The EPS warning light (for equipped models)
should come on and stay on until the engine
is started.

OPERATION

" (on) and the engine stop
The following warning lights should come on
for a few seconds, then go off.
 Coolant temperature warning light
 Engine trouble warning light
 Fuel level warning light (for equipped mod-
els)
ECB00826
NOTICE
To avoid possible damage, do not operate the
ATV if a warning light does not work as de-
scribed above.
2. Apply the brake pedal, and then shift the drive
select lever into the neutral or park position.
The corresponding indicator light should
come on. If the indicator light does not come
on, have a Yamaha dealer check the electrical
circuit.
TIP
This model is equipped with an ignition circuit cut-
off system. The engine can be started under the
following conditions:
 The drive select lever is in the neutral or park po-
sition.
6-1