At The End Of The Programme; Switching Off; Unloading The Dishwasher - Miele PG 8058 Operating Instructions Manual

Table of Contents

Advertisement

Operation
54

At the end of the programme

After a programme which has ended normally the Start/Stop button's
LED will go out and the  button's LED will flash. The message
Programme finished
Universal
Temperature
Programme finished
In addition to this a buzzer will also sound for approx. 3 seconds
(factory default). To alter the buzzer tones see "Settings , Buzzer
tones".
If drying assistance has been activated (see "Settings , Drying"), the
door will automatically open a few centimetres.
If the switch-off function is activated, the dishwasher switches itself
off after a short time.
Press the  button to switch on.

Switching off

Press the  button until the LED in the button goes out.
If the dishwasher is switched off, the time of day set appears in the
display.
You can also alter the time of day display when the dishwasher is
switched off (see "Settings , Setting the time, Display").

Unloading the dishwasher

Dishes tend to break and chip more easily when they are hot. Allow
the dishes to cool until they are comfortable enough to handle before
unloading them.
If you open the door fully after switching off, the dishes will cool much
faster.
First unload the lower basket, then the upper basket. This will prevent
water drops from the upper basket falling onto the dishes in the lower
basket.
will appear in the bottom line of the display.
55 °C

Advertisement

Table of Contents
loading

Table of Contents