Table of Contents
Advertisement
ENGINE
Radiator Remove & Replace
Liquid-Cooled Mowers
1.
Disconnect the negative battery cable.
Figure 44
2.
Remove the pins from the radiator cover and lift
off the cover.
Figure 45
3 - 8
3.
Remove the radiator cap and open the drain
petcock to drain the coolant into a suitable
container.
4.
To drain the block, remove the drain bolts.
0507-001
NOTE: Apply sealant to the bolt threads during
reassembly.
0507-002
5.
Loosen the radiator hose clamps at the water
pump and thermostat housing and remove the
hoses from the fittings.
Figure 46
Figure 47
Mid-Mount Z Service Manual
0507-003
0507-004
Advertisement
Table of Contents
