When first booting a diskless Seagate WSS NAS, the device must be placed into recovery mode to install
the operating system on Disk 1.
1. Use a thin pointed object (e.g. paperclip, thin screwdriver, etc.) to push the recovery button. Hold the
recovery button while applying a short push on the power button on the front of the WSS NAS. To make
certain that the WSS NAS enters recovery mode, continue to push the recovery button for five seconds
after releasing the front power button.
2. The status LED blinks for approximately 5 minutes. Wait for the status and function LEDs to turn solid
before moving to the next step.
Step 4 - Install Windows Storage Server 2012 R2 Essen als
Seagate WSS NAS 2-Bay | 4-Bay | 6-Bay
4/13/15
43