Environment; Nas Placement; Equipm Ent Handling Precautions - Seagate SRPS20 User Manual

Environment

A safe electrical ground connection must be provided to the power cord. Check the grounding of the
enclosure before applying power.
Provide a suitable power source with electrical overload protection to meet the requirements laid down in
the technical specification.
Never expose your device to rain, or use it near water, or in damp or wet conditions. Never place objects
containing liquids on the enclosure, as they may spill into its openings. Doing so increases the risk of
electrical shock, short-circuiting, fire, or personal injury.
Always unplug the device from the electrical outlet if there is a risk of lightning or if it will be unused for an
extended period of time. Otherwise, there is an increased risk of electrical shock, short-circuiting, or fire.
DO NOT remove the chassis cover. Doing so will:
Void the product's warranty
Expose hot surfaces (heat sinks)
The NAS must never be used as a shelf to support any other object.

NAS placement

Place your Seagate WSS NAS on a surface that is capable of supporting its total weight, including all the hard
drives and any accessories attached to the NAS's ports. The design of the surface area should incorporate
stabilizing features suitable to prevent the NAS from tipping or being pushed over during installation or in
normal use.
Do not add any load onto the Seagate WSS NAS when it is placed onto the surface. Doing so can prevent
proper airflow and affect operation.
The maximum ambient temperature during operation is 40°C.
The power connection must have a safe electrical distribution system and provide overcurrent protection.
When addressing these concerns, consider the electrical power consumption rating shown on the product.
The electrical distribution system must provide a reliable ground for this unit.
The power supply unit has a ground leakage current of 3.5mA. The design of the electrical distribution
system must take into consideration the total ground leakage current from all the power supplies in all the
units.
Equipment handling precau ons
Seagate WSS NAS 2-Bay | 4-Bay | 6-Bay 4/13/15 10