Standard Features - HP Integrity BL890c i2 Quickspecs

QuickSpecs

Standard Features

Processor Quad-Core Processors
One of the following
Intel® Itanium® 9320 (1.33GHz/4-core/16MB/155W); up to 1.46 GHz with Turbo) Processor
depending on Model
Intel® Itanium® 9340 (1.6GHz/4-core//20MB/185W); up to 1.73 GHz with Turbo) Processor
Intel® Itanium® 9350 (1.73GHz/4-core/24MB/185W; up to 1.86 GHz with Turbo) Processor
Dual-Core Processor
Intel® Itanium® 9310 (1.6GHz/2-core/10MB/130W) Processor
Upgradeability Upgradeable to eight (8) processors
NOTE: The HP Integrity BL890c i2 supports 4, 5, 6, 7, or 8 processor configurations. Processors must be
identical.
Cache Memory L2 cache per core; 512KB Instruction, 256KB Data
One of the following
L3 cache; up to 24MB, see processor specifics
depending on Model
Chipset Intel Boxboro
Memory
Type
Minimum
Maximum
NOTE: Memory modules consist of two (2) DIMMs.
NOTE: Double Chip Spare is enabled in a pairs DIMMs. Double Chip Spare requires identical DIMM types
and capacities
NOTE: Memory must be loaded in quads (two memory modules, 4 DIMMs)
Network Adapter Sixteen (16) NIC ports via (8) NC532i Dual Port Flex-1010GbE Multifunction Server Adapter
NOTE: Flex-10 capability requires OS drivers and the use of an HP Virtual Connect Flex-10 10GbE
Ethernet module. Learn more at:
NOTE: BL8x0c i2 server blades require Virtual Connect 3.00 or later when used in Virtual Connect
configurations
NOTE: Each part is autosensing 1Gb/10Gb, and can interoperate with 1Gb HP BladeSystem c-Class
interconnect components.
One (1) additional 10/100 NIC dedicated to Integrity iLO 3 Management
NOTE: Up to thirty-two additional Gigabit Ethernet ports via the NC364m Quad-port mezzanine adapter,
or sixteen additional 10 Gigabit Ethernet ports via the NC532m dual-port mezzanine adapter.
Expansion Slots
Twelve Mezzanine slots, eight (8) Type II and four (4) Type I, PCIe x8 Gen2
Integrated Integrity Integrated Lights-Out 3 (iLO 3)
Manageability
Factory installed Integrity iLO 3 Advanced Pack License
HP BladeSystem c-Class Onboard Administrator
HP BladeSystem c-Class Virtual Connect
Storage Controller
Four (4) HP p410i 3Gb SAS
Controller
Maximum Internal
Hot Plug SAS
Storage
DDR3 registered memory modules (R-DIMMs)
32 GB (8 x 4 GB DIMMs)
1.5 TB (96 x 16 GB DIMMs)
www.hp.com/go/virtualconnect
8 SAS Channels (one to each HDD)
Supports RAID 1, RAID 0, and HBA mode options
Zero (0) cache, no cache options
7.2TB SAS
c04111605 — DA – 13619 Worldwide — Version 24 — June 01, 2015
HP Integrity BL890c i2 Server Blade
8 x 900GB SAS
Page 4