HP Integrity BL890c i2 Quickspecs page 2

QuickSpecs
Overview
http://h18000.www1.hp.com/products/quickspecs/12810_div/12810_div.html

HP BladeSystem c-Class Interconnect and Mezzanine Components:
http://h18004.www1.hp.com/products/blades/components/c-class-interconnects.html
http://h18004.www1.hp.com/products/blades/components/c-class-adapters.html
The HP Integrity BL890c i2 delivers the performance, reliability, and availability on 64-bit operating systems (HP-UX 11i v3,
Microsoft Windows® Server 2008 for Itanium-based systems and OpenVMS v8.4) for the ultimate in scalability and flexibility in
deployment. To further enrich your cost-efficient, consolidated Integrity blade infrastructure, HP Insight Dynamics - VSE for HP
Integrity Servers can help with solution components such as HP-UX Virtual Partitions (vPars) v6.0, HP Integrity Virtual Machines,
HP Integrity Essentials Capacity Advisor and Virtualization Manager, HP Global Workload Manager and HP-UX Workload
Manager, HP Insight Dynamics infrastructure orchestration HP Dynamics - VSE Reference Architectures, and HP Serviceguard.
HP Integrity BL890c i2 server blade includes:

Processor:
Up to eight Intel® Itanium® 9300 Series processors
o

Memory:
Up to 1.5 TB of memory. Supporting (96) DDR3 registered memory modules (R-DIMMs)
o

Storage Controller:
Four (4) Embedded HP p410i SAS RAID Controllers integrated on system board
o
RAID 1 and RAID 0, and HBA mode configuration options
o

Internal Drive Support:
Supports up to (8) eight small form factor (SFF) SAS hot plug hard drives
o

Network Controller:
Sixteen (16) NIC ports via eight (8) embeddedNC532i Dual Port Flex-10 Multifunction Server Adapters
o
NOTE: Flex-10 capability requires OS drivers and the use of an HP Virtual Connect Flex-10 10GbE Ethernet
module. Learn more at:
NOTE: BL8x0c i2 server blades require Virtual Connect 3.00 or later when used in Virtual Connect
configurations
NOTE: Each port is autosensing 1Gb/10Gb, and can interoperate with 1Gb HP BladeSystem c-Class
interconnect components
Plus one (1) additional 10/100 NIC dedicated to Integrity iLO 3 Management
o

Mezzanine Support:
Twelve (12) additional I/O expansion slots via mezzanine cards.
o
Supports up to (12) mezzanine cards
o












USB Support:
Four (4) Internal USB ports on the BL890c i2
o
Two (2) External USB ports on the BL890c i2 via SUV cable
o

Management:
HP Integrity Server Blades Management Software
o

www.hp.com/go/virtualconnect
HP NC553m Dual Port 10Gb FlexFabric Adapter
NOTE: A maximum of 8 HP BLc NC553m Dual Port 10Gb Adapters are supported with BL890c i2
HP NC551m Dual Port 10Gb FlexFabric Adapter
NOTE: A maximum of 8 HP BLc NC553m Dual Port 10Gb Adapters are supported with BL890c i2
HP NC552m 10Gb 2-port Flex-10 Ethernet Adapter
HP NC532m Dual Port Flex-10 10GbE BL-c Adapter
NOTE: A maximum of 8 HP BLc NC532m Dual Port Flex-10 10Gb Adapters supported with BL890c i2.
HP Emulex LPe1205 8Gb FC BL-c HBA (2-port 8Gb Emulex FC HBA)
HP QMH 2562 8Gb FC BL-c HBA (2-port 8Gb QLogic FC HBA)
HP Smart Array P711m/1G FBWC 6G SAS Controller
HP Smart Array P700m/512 Controller
HP 4X QDR IB CX-2 Dual Port Mezz HCA for HP BladeSystem c-Class
HP NC364m 4-port 1GbE BL-c Adapter
HP NC360m 2-port 1GbE BL-c Adapter
Integrity Integrated Lights-Out 3 (iLO 3) management processor
c04111605 — DA – 13619 Worldwide — Version 24 — June 01, 2015
HP Integrity BL890c i2 Server Blade
Page 2