Servicing The Engine Oil - Toro 74583 Operator's Manual

Grandstand mower with 60in turbo force cutting unit
Hide thumbs Also See for 74583:
Table of Contents

Advertisement

Important: Do not press on the soft inside area
of the filter.
4. Install the air cleaner cover and secure the latches
(Figure 39).

Servicing the Engine Oil

Oil Type: Detergent oil (API service class SJ or higher)
Oil Capacity: with a filter change, 58 ounces (1.7 L);
with no filter change, 48 ounces (1.4 L)
Viscosity: See the table below.
0
0
Checking the Engine Oil Level
Service Interval: Before each use or daily
Note: Check the oil when the engine is cold.
WARNING
Contact with hot surfaces may cause personal
injury.
Keep hands, feet, face, clothing and other body
parts away from the muffler and other hot surfaces.
Important: Do not overfill the crankcase with oil
because damage to the engine may result. Do not
run engine with oil below the low mark because the
engine may be damaged.
1. Disengage the PTO, move the motion control levers
to the neutral locked position and set the parking
brake.
2. Stop the engine, remove the key, and wait for all
moving parts to stop before leaving the operating
position (Figure 41).
SAE 30
50
Figure 40
1
3
6
8
g017552
32
2
5
4
7
10
9
Figure 41
G008792

Advertisement

Table of Contents
loading

Table of Contents