Service Interval Chart; Premaintenance Procedures; Removing The Hood - Toro 03170 Operator's Manual

Notation for Areas of Concern (cont'd.)

Service Interval Chart

Premaintenance
Procedures

Removing the Hood

The hood may be easily removed to ease maintenance
procedures in the engine area of the machine.
1. Unlatch and raise the hood.
2. Remove the cotter pin that secures the hood pivot to
the mounting brackets (Figure 46).
Figure 45
1. Cotter pin
3. Slide the hood to the right side, lift the other side,
and pull it out of the brackets.
Note: Reverse the procedure to install the hood.
41
Figure 46