Installing The Front Wheels; Installing The Seat - Toro 70185 Setup Instructions

Procedure
12
1

Installing the Front Wheels

Parts needed for this procedure:
2 Wheels
2 Flat washers, M16 (3 mm thick)
4 Spacers, M16 (1 mm thick)
2 Cotter pins
Procedure
1. Slide a flat washer (M16, 3mm thick) onto each
spindle (Figure 1).
1. Spindle
2. Wheel
3. Flat washer (M16, 3 mm
thick)
2. Mount the wheels and secure each of them with 2
spacers (M16, 1 mm thick) and a cotter pin (Figure 1).
3. Grease the wheels.
Description
Operator's Manuals (English and
French)
Engine operator's manual
Keys
Spark plug wrench
Oil drain tube
Recycler® cover
Figure 1
4. Spacers (M16, 1 mm thick)
5. Cotter pin
Qty.
2
1
Read the manual before operating or
2
servicing the mower.
1
1
1
2

Installing the Seat

Parts needed for this procedure:
1 Seat
4 Screws, M8 x 18 mm
4 Flat washers, M9
4 Lock washers
Procedure
Attach the seat to the support plate with 4 flat washers
(M9), lock washers, and screws (M8 x 18 mm) (Figure 2).
1. Seat Support plate
2. Flat washer (M9)
Note: Before tightening the screws, adjust the seat to a
position that is most comfortable for you.
2
Use
Figure 2
3. Lock washer
4. Screw (M8 x 18 mm)