Wiring The Antenna Unit Power Cable - KVH Industries TracVision L3 Owner's Manual

2.3.2 Wiring the Antenna Unit Power Cable

TracVision L3 will not function properly unless you connect the
power cable (Cable #32-0590-30).
Power Cable-to-Baseplate Terminals Wiring Process
1. Feed the cable up to the roof and through the
fourth liquid-tight fitting (#4) from the left as
pictured previously in Figure 2-10.
2. Refer to Figure 2-15 for the proper arrangement of
power cable wires within the terminal strip.
3. After connecting the power cable to the
TracVision L3, hook up the other end to the
switchplate as described in the next subsection.
54-0157 Rev. C
Figure 2-14
Antenna Data Cable Wiring
Arrangement
Data Cable
to Antenna
Figure 2-15
Proper Terminal Strip Wiring
Arrangement – Power Cable
Shield 1
Red 2
Black 3
Installation
Grnd
+12v DC
Grnd
2-9