Table of Contents
Advertisement
Delta Elec. Inc.
Step 2: Make sure that the USB cable is firmly connected between projector and computer
Step 3: Connect the power cord to the projector, and move the power switch in its ON position (if available) so
that projector is in STAND BY mode.
Step 4: Press
<Down>, <Up>, <Right>, <Up>
remote controller for those with limited keypads. The power and lamp LED shall blink and the Flash-Tool mode
will be enabled.
Note:
The Windows hardware wizard will pop up if the USB device driver is not installed.
Simply select the recommended options, and let Windows Wizard does the trick.
.
Step 5: Press the "Choose" button to locate the new firmware which can be downloaded from website (for
example: DP3622-JAXX-DPD0A.img). Select the desired .img file by either double clicking the file, or pressing
the "Open" button.
Company Confidential
54
DP-3510 YYDA & DP-2510 YYDA
keys in sequence using keypad buttons, or using the IR
Press "Choose" to select file
LGE_______________________
Projector information
Use .img file type for
firmware binary data
Delta____________
rev.00
2007/11/30
Advertisement
Table of Contents
