Table of Contents
Advertisement
Delta Elec. Inc.
Note:
In case that you has USB enumeration problem (i.e., the USB port cannot recognize your
projector), please clear all USB items in the windows registry, and re-install the Flash-Tool
USB driver. See Appendix-A for further details.
The projector is now in the Flash-Tool mode after the click.
Company Confidential
45
DP-3510 YYDA & DP-2510 YYDA
Windows completes the new hardware wizard.
Press the "Finish" button to exit.
Once when the Projector Control USB driver is enumerated, the
projector information is displayed in the status window.
Click on the "Check" button to place the projector in the
Flash-Tool mode.
The purpose of this function is to verify whether or not the project is
successfully in the Flash-Tool mode.
LGE_______________________
rev.00
Delta____________
2007/11/30
Advertisement
Table of Contents
