Product Dimensions - Whirlpool W10575959B Installation Instructions Manual

Product Dimensions

A*
F
A. 35 / " ± / " (90.8 cm ±
3 1
4 8
0.3 cm) cooktop height
(minimum) with leveling legs
screwed all the way in*
B. Model/serial/rating plates
(located behind the control
panel)**
* Range can be raised approximately 1" (2.5 cm) by adjusting
the leveling legs.
** Model/serial/rating plates may be rotated up from behind the
control panel for viewing from the front of the range.
*** Excludes handle. Dimension given is from wall to front of
oven door and will vary based on electric outlet receptacle
installation.
B**
C*
D
E***
C. 47 / " ± / " (119.7 cm
1 1
8 8
± 0.3 cm) overall height
(minimum) with leveling legs
screwed all the way in*
D. 28 / " ± / " (72.4 cm ±
1 1
2 4
0.6 cm) depth with handle
E. 26 / " ± / " (66.4 cm ±
1 1
8 8
0.3 cm)***
F. 29 / " ± / " (76.0 cm ±
15 1
16 16
0.2 cm) width
Cabinet Dimensions
Cabinet opening dimensions shown are for 25" (63.5 cm)
countertop depth, 24" (61.0 cm) base cabinet depth, and
36" (91.4 cm) countertop height.
IMPORTANT: If installing a range hood or microwave hood
combination above the range, follow the range hood or
microwave hood combination installation instructions for
dimensional clearances above the cooktop surface.
A freestanding range may be installed next to combustible walls
with zero clearance.
A
I
A. 18" (45.7 cm) upper
cabinet to countertop
B. 13" (33.0 cm) upper
cabinet depth
C. 30" (76.2 cm) min.
opening width
D. For minimum clearance
to the top of the cooktop,
see NOTE.
E. U.S.A.: 30" (76.2 cm) min.
opening width
Canada: 31" (78.7 cm)
min. opening width
Proper positioning of outlet shown above.
* Nothing located in shaded areas can extend more than
1 / " (3.8 cm) from wall or range will not slide all the way back.
1
2
NOTE: 24" (61.0 cm) minimum when bottom of wood or metal
cabinet is covered by not less than
millboard covered with not less than No. 28 MSG sheet steel,
0.015" (0.4 mm) stainless steel, 0.024" (0.6 mm) aluminum, or
0.020" (0.5 mm) copper.
30" (76.2 cm) minimum clearance between the top of the
cooking platform and the bottom of an uncovered wood or metal
cabinet.
B
D
C
E
J
G
F
H
K
F. Cabinet door or hinge
should not extend into
cutout*
G. 1 / " (3.8 cm) min. from
1
2
right side cabinet
H. 2" (5.1 cm) min. from floor
I. 7" (17.8 cm) height
J. 8" (20.3 cm) width
K. 3 / " (8.9 cm) min. from
1
2
floor
/ " (0.64 cm) flame-retardant
1
4
3