Miele KFN 29683 D Operating And Installation Instructions page 73

Message

 lights up red in the
display and an alarm
also sounds.
Cause and remedy
Indication of an interruption to the power supply:
the temperature in the appliance over the last few
days or hours has risen too high because of a power
cut or interruption to the power supply.

 Touch  in the display.
The fault message is confirmed:

 goes out and the alarm will stop.
The start screen appears in the display: the warmest
temperature recorded in the freezer section will flash
for about 1 minute in the display. Then the temperat-
ure display will change to the current temperature in
the freezer section.
You can exit from the flashing temperature display
early:
 Touch the temperature display for the freezer sec-
tion.
The warmest temperature display will go out. The dis-
play will then revert to showing the current temperat-
ure in the freezer section. The appliance will then
work at the lower temperature setting.
 Rectify the cause of the alarm.
 Depending on the temperature displayed, you
should check the condition of food in the freezer. If
it has defrosted or started to defrost, check that it
is still safe to use and, if so, use it as soon as pos-
sible. Defrosted food may only be re-frozen after it
has been cooked.
Problem solving guide
73