Miele KFN 29683 D Operating And Installation Instructions page 60

Cleaning and care
Dismantling the adjustable shelves /
adjustable shelves with lighting

The stainless steel trim with LED
lighting must not be placed in water
when cleaning it.
Clean the stainless steel trim with
LED lighting with a damp cloth.

The stainless steel trim with LED
lighting or the stainless steel trim on
the adjustable shelves is not suitable
for cleaning in a dishwasher.
Remove the trim before placing the
shelves in the dishwasher.
To remove the stainless steel trim and
the rear protective strips, proceed as
follows:
 Place the shelf with the top facing
downwards on a worktop covered
with a soft material (e.g. a tea towel).
60

The stainless steel trim with LED
lighting has a metal disc (contacts) at
the front left corner which supply
power to the LED lighting.
These can become damaged when
the trim is removed.
Ensure that you always loosen the
side on which the contacts (metal
disc) are not located first.
 Grasp the plastic surround on the
left-hand side of the stainless steel
trim at its furthest back point.
1. Pull the plastic surround away from
the shelf and
2. pull the trim off at the same time.
Then do the same on the opposite
side
3. Pull the protective strip off the shelf.
 After cleaning the shelf, attach the
stainless steel trim and protective
strip in the reverse order.