Changing the door hinging
Changing the soft-close mechanism
over
Undo and remove screws on soft-
close mechanism and insert a
screwdriver behind the soft-close
mechanism.
Remove soft-close mechanism
and turn it through 180°.
100
Insert soft-close mechanism on
the door hinge side (at an angle ini-
tially) so that it clicks into position.
Then press the other end of the soft-
close mechanism into the opening.
Secure the soft-close mechanism
with screw .
Changing over the bearing bush
stopper
Pull the stopper out of door bearing
bush and replace it on the oppos-
ite side.