Attachment 3 -Hopping Channel - Grandstream Networks GXV3240 Manual

ATTACHMENT 3 –HOPPING CHANNEL
CLIENT:
MODEL TESTED:
SERIAL NO.:
TEMPERATURE:
ATM PRESSURE:
TESTED BY:
TEST METHOD:
TEST PROCEDURE
TEST RANGE
LIMITS:
TEST VOLTAGE:
TEST STATUS:
RESULTS:
CHANGES OR
MODIFICATIONS:
M. UNCERTAINTY:
Continue on to next page...
Test Report #: SHE-1402-11114-RF-#1
Prepared for Grandstream Networks, INC
Prepared by ECMG Electronic Technical Testing Corp (Shenzhen).
Grandstream Networks,
INC
GXV3240
Engineering Sample
22°C
101.7 kPa
Daomen
As annex C1 of standard EN 300 328
1. Connect EUT antenna terminal to the spectrum analyzer with a low loss
cable.
Equipment mode: spectrum analyzer.
detector function: Peak.
RBW=10KHz,VBW=30KHz.
2. By using the Max-Hold function record the separation of two adjacent
channels.
3. Measure the frequency difference of these two adjacent channels by
spectrum analyzer Marker function.
4. Repeat above procedures until all frequencies measured were complete.
N/A
Refer to 5.1.5
230VAC/50Hz
Keep EUT on transmitting mode by the software provided by manufacturer.
No non-compliance noted.
There were no modifications installed by ECMG Electronic Technical Testing Corp
(Shenzhen) test personnel.
Temp: 1°C, Humidity: 5%
TEST STANDARD:
PRODUCT:
EUT DESIGNATION:
HUMIDITY:
GROUNDING:
DATE OF TEST:
EN 300 328 clause
4.3.4.2
IP Multimedia Phone
SRD
55%RH
No Grounding
th
March 14 ,2014
Page 23 of 36