Sharp AR-C260P Operation Manual page 17

Menu groups and using the keys on the operation panel
There are 6 menu groups. The menu groups are consecutively displayed by pressing the [MENU] key. To select a
menu group, display the menu group and then press the [OK] key. The first setting or function in the group will appear.
READY.
[MENU] key
PRINT JOBS ON HOLD
[MENU] key
BYPASS TRAY PAPER
SELECTION
[MENU] key
SET OPERATING
CONDITIONS
[MENU] key
CUSTOM SETTINGS
[MENU] key
KEY OPERATOR
PROGRAMS
[MENU] key
Job status screen
The message "WARMING UP" will be displayed when the power is turned on
and a list of the current job or a list of waiting jobs will be displayed on the job
status screen. Examples of the various messages which will be displayed are
shown below.
(Display example)
WARMING UP.
READY.
FROM TRAY #
CHANGE THE TONER
CARTRIDGE.
PAPER JAM.
ADD PAPER.*
Print hold
If the job retention function is used from your computer, print data will
be stored in the printer as a hold job.
Bypass tray paper selection
Use this to specify the type of paper that has been loaded in the
bypass tray. (See page 2-14.)
Condition settings
The printer condition settings are used for basic printer settings. (See
page 3-2.)
Custom settings
Custom settings are used to make settings based on use patterns.
(See page 2-17.)
Key operator programs
These are settings used by key operators (administrators of this
product). For the use of these programs, see the Key Operator's
Guide.
The Key Operator's Guide is provided as PDF file in the CD-ROM that
accompanies the AR-C260P.
PART NAMES AND FUNCTIONS
The printer is warming up.
The printer is ready to print.
The printer is currently printing.
Out of toner. Replace the toner
cartridge. (See page 2-20)
A misfeed has occurred. (See
page 2-23)
Out of paper. Load paper. (See
page 2-2)
(See page 4-2)
1
1-9