Beurer BC 57 Instructions For Use Manual page 31

A flashes on the display.
The average value of all saved measured
values in this user memory is displayed.
• Press the memory button M.
AM flashes on the display.
The average value of the morning meas-
urements for the last 7 days is displayed
(morning: 5.00 a.m. – 9.00 a.m.).
• Press the memory button M.
PM flashes on the display.
The average value of the evening meas-
urements for the last 7 days is displayed
(evening: 6.00 p.m. – 8.00 p.m.).
• When the memory button M is pressed
again, the last individual measurement
is displayed (in this example, measure-
ment 03).
• When the memory button M is pressed again, you
can view your individual measured values.
• To switch the device off again, press the START/
STOP button
You can exit the menu at any time by pressing the
START/STOP button
• To clear the memory of the relevant user memory,
you must first select a user memory.
• Start the retrieval of the average measured values.
A flashes on the display and the average value of
all saved measured values in this user memory is
displayed.
• Press and hold the memory button M for 5 sec-
onds depending on the user memory you are in.
All the values in the current user memory
are deleted.
31
.
.