Lexus RC350 User Manual page 307

BSM function detection areas
The areas that vehicles can be detected in are outlined below.
The range of each detection area is:
Approximately 1.6 ft. (0.5 m) to 11.5 ft. (3.5 m) from either side of the vehicle
1
*
: The area between the side of the vehicle and 1.6 ft. (0.5 m) from the side of the vehicle
cannot be detected.
Approximately 3.3 ft. (1 m) forward of the rear bumper
2
Approximately 9.8 ft. (3 m) from the rear bumper
3
Approximately 9.8 ft. (3 m) to 197 ft. (60 m) from the rear bumper
4
*
: The greater the difference in speed between your vehicle and the detected vehicle is,
the farther away the vehicle will be detected, causing the outside rear view mirror
indicator to illuminate or flash.
WARNING
Cautions regarding the use of the function
■
The driver is solely responsible for safe driving. Always drive safely, taking care to
observe your surroundings.
The BSM function is a supplementary function which alerts the driver that a vehicle is in
a blind spot of the outside rear view mirrors or is approaching rapidly from behind into
a blind spot. Do not overly rely on the BSM function. As the function cannot judge if it is
safe to change lanes, over reliance could lead to an accident resulting in death or seri-
ous injury.
As the system may not function correctly under certain conditions, the driver' s own
visual confirmation of safety is necessary.
RC350_RC300_RC200t_RC F_U (OM24671U)
4-5. Using the driving support systems
307
*
4
*