Lexus RC350 User Manual page 258

258
4-5. Using the driving support systems
NOTICE
To prevent damage to or incorrect operation of the LDA system
■
Do not modify the headlights or attach stickers to the surface of the lights.
●
Do not modify the suspension.
●
If any suspension parts need to be replaced, contact your Lexus dealer.
Do not install or place anything on the hood or the grille. Also, do not install a grille
●
guard (bull bars, kangaroo bar etc.).
If your windshield needs repairs, contact your Lexus dealer.
●
Camera sensor
■
Observe the following to ensure that the LDA system functions correctly.
Keep the windshield clean at all times.
●
Performance could be affected if the windshield is dirty, or if raindrops, condensation
or ice are adhering to the windshield.
Do not attach a sticker or other items to the
●
windshield near the camera sensor.
Do not spill liquid onto the camera sensor.
●
Do not attach window tinting to the windshield.
●
Do not install an antenna in front of the camera lens.
●
If the area of the windshield in front of the camera sensor is fogged up, use the wind-
●
shield defogger to remove the fog.
When it is cold, setting the heater to blow air to the feet only may cause the area of
the windshield in front of the camera sensor to fog up. This will have a negative effect
on the images.
Do not scratch the camera lens, or let it get dirty.
●
When cleaning the inside of the windshield, be careful not to get any glass cleaner
etc. on the lens. Also, do not touch the lens.
For lens repair, contact your Lexus dealer.
Do not change the installation position or direction of the camera sensor or remove it.
●
The direction of the camera sensor is precisely adjusted.
Do not subject the camera sensor to strong impact or force, and do not disassemble
●
the camera sensor.
If the windshield needs to be replaced, contact your Lexus dealer.
●
RC350_RC300_RC200t_RC F_U (OM24671U)