Eureka 1400 series Owner's Manual page 6

Step 4 - Outer Bag
Step 4 - Outer Bag
Hold outer bag with zipper away from
Hold outer bag with zipper away from
handle. Important: To provide a good
handle. Important: To provide a
gasket seal, the bag coupling must
good gasket seal, the bag
seat firmly against the motor base
coupling must seat firmly against
and not overlap the furniture guard.
the motor base and not overlap
Start the bag screws D by hand, then
the furniture guard. Start the bag
tighten with a screwdriver.
screws D by hand, then tighten with
a screwdriver.
Step 5 - Bag Support
Step 5 - Bag Support
Loop the spring F onto the bag support
G, located to the back of the upper
Loop the spring F onto the bag
support G, located to the back of the
cord hook.
upper cord hook.
D
Step 6 - Cord Storage
Step 6 - Cord Storage
Secure the cord in the guide below the
Secure the cord in the guide below the
upper cord hook as shown or secure
upper cord hook as shown or secure
the cord into the side of the upper cord
the cord into the side of the upper cord
hook.
hook.
Secure cord into lower cord hook. Pull
Secure cord into lower cord hook. Pull
up on cord to tighten but leave slack
up on cord to tighten but leave slack
near the base so the cord does not
near the base so the cord does not
strain when the handle is lowered for
strain when the handle is lowered for
use. Wrap the cord around the cord
use. Wrap the cord around the cord
hooks. Fasten the plug to the cord to
hooks. Fasten the plug to the cord to
prevent unwinding.
prevent unwinding.
6
6
F
E
C–
G
Upper
Guide
Upper Cord
Hook
Lower Cord
Hook