Stand - BMW G 650 GS Rider's Manual

Position rear wheel cover and
install screws 2 and 3.
Install two screws 1.
BMW Motorrad front
wheel stand
Mounting front wheel

stand

The BMW Motorrad front
wheel stand is not designed
to support the motorcycle with-
out the assistance of an auxiliary
stand. A motorcycle standing on
the front wheel stand and the
rear wheel alone can fall over.
Place the motorcycle on an aux-
iliary stand before lifting the front
wheel with the BMW Motorrad
front-wheel stand.
Place motorcycle on a suitable
auxiliary stand.
OE
with center stand
Make sure ground is level and
firm and place motorcycle on
center stand.
Use basic stand with tool
number (83 30 0 402 241) in
combination with front-wheel
adapter (83 30 0 402 242).
Loosen adjusting screws 1.
Push two mounts 2 far enough
apart that front suspension fits
between them. Adjust support
pin to match front suspension.
Use locating pins 3 to set front
wheel stand to desired height.
Center front wheel stand rela-
tive to front wheel and push it
against front axle.
8
81
z