Jump-Starting - BMW G 650 GS Rider's Manual

8
90
Close connector 5.
z
Insert suction pipe in mount 4.
Insert suction pipe in guides 7
of air filter housing. Make sure
rubber gaskets of air filter insert
are not folded.
Insert connecting flange 2.
Install two screws 1.
Installing right fairing side panel
( 95).

Jump-starting

The wires leading to the
power socket do not have
a load-capacity rating adequate
for jump-starting the engine. Ex-
cessively high current can lead
to a cable fire or damage to the
motorcycle electronics.
Do not use the onboard socket
to jump-start the engine of the
motorcycle.
A short-circuit can result
if the crocodile clips of
the jump leads are accidentally
brought into contact with the
motorcycle.
Use only jump leads fitted with
fully insulated crocodile clips at
both ends.
Jump-starting with a donor-
battery voltage higher than