Specifications - Fender 1270P Service Manual

Product Release No.:
Part Number:
Power Requirement:
Power Output:
Inputs:
Outputs:
Frequency Response:
Maximum Output SPL at 1M:
Input Sensitivity:
Tone Control:
Low Freq. Driver:
High Freq. Driver:
Maximum Output:
Crossover Freq:
Dimensions:
Weight:
1270P MONITOR

SPECIFICATIONS

PR 435 (This is not a model number)
71-1271-000 (120V, 60Hz)
71-1271-040 (230V, 50Hz)
360W
100W, THD <0.5% (bi-amped)
XLR Balanced, mic-level (Mic input supplied w/full-time 15V phantom
pwr); 1/4" TRS balanced, line-level (LINE input); 1/4" TS unbalanced,
line level (AMP IN input)
1/4" TS unbalanced, line-level (LINE OUT output)
110Hz - 20k
109dB (continous)
Line: 100mV RMS, -20dBV and Mic: 10mV RMS, -40dBV
Amp In: 1V RMS, 0dBV (LEVEL @ max for all three inputs)
+/- 10 dB @ 12kHz
10" (25.4 cm), 4Ω with 2" (5.1 cm) Voice Coil (p/n 0055911000)
Coaxial Piezo Compression Driver, 1.5" Diaphragm (p/n 0055741000)
115dB (Continous), 121dB (peak @ 1 Meter)
2.2kHz
Height:13 3/8"
Width: 13 3/8"
Depth: 9 1/8"
22 lbs.
Product specifications are subject to change without notice
71-1271-060 (230V, 50Hz) Eur
71-1271-030 (240V, 50Hz) Aust
115dB (peak)
(34 cm)
(34 cm)
(23.2 cm)
(10 kg)