Speaker Connections; Specifications - Fender Super Sonic 60 Owner's Manual

Your new Super-Sonic 60 speaker enclosure delivers big, full tone
that is the perfect companion to the Super-Sonic 60 Head or other
quality tube amplifier. Features include:
• Premium 3/4" Birch Ply construction for resonant tone
• Two Celestion® Vintage 30 speakers for tight bottom end and rich
highs
• Vintage tilt-back legs aid sound dispersion
• Knurled thumbscrews for securing the Super-Sonic head to the
cabinet
• Available in Blonde/Oxblood or Black/Silver cosmetic treatment
• 120 Watt power handling
• 8 Ohm impedance
PART NUMBER:
DRIVERS:
CABINET:
SENSITIVITY:
POWER HANDLING:
IMPEDANCE:
CONNECTIONS:
ENCLOSURE VOLUME:
COVER (included):
DIMENSIONS:
WEIGHT:
4
Super-Sonic™ 60 212 Enclosure
Use speaker cable (16-gauge or heavier) with standard 1/4"
plugs to connect each Super-Sonic enclosure to a speaker
output jack on your amplifier.
CAUTION— Only connect speakers in accordance with your
amplifier's minimum impedance rating and maximum power
output specifications to prevent damage to your equipment.
CAUTION—Fender® amplifiers and loudspeaker systems are
capable of producing very high sound pressure levels which
may cause temporary or permanent hearing damage. Use
care when setting and adjusting levels during use.

Specifications

2161200010 (Black)
2161200410 (Blonde)
Two 12" (30.5 cm) Celestion® Vintage 30 with
1.75" (4.5 cm) voice coils and 50 oz (1.4 kg) magnets
0.75" (1.9 cm) 13-ply Birch
100dB, 1 Watt–1 Meter
120 Watts (continuous)
8Ω
1/4" high current phone jack
V = 4.7ft (133 l)
3
B
P/N (0072417000)
Height: 20.88 in (53 cm)
Width: 32 in (81.3 cm)
Depth: 12 in (30.5 cm)
70 lb (31.7 kg)
Product specifications are subject to change without notice.
fender.com

SPEAKER CONNECTIONS