Step 3.9
Confirm your settings at this page. If everything is correct, click Apply
to save the settings, then the camera will restart in 50 seconds.
Step 3.10
After the camera is restarted, unplug the network cable from it. It will
take around 1 or 2 minutes for the camera connecting to your wireless
router/AP.
To make sure the wireless connection is successfully established, open the
SkyIPCam Utility and click on Search. If the camera shows up in the list, it is
connected to your wireless network successfully. If not, please verify the SSID
and the wireless security settings you configured at Step 3.8 are correct.
9