Download Print this page

Specifications; Contact Information; Regulatory Information - Interlogix NXG-1820-EUR User Manual

The nxg-1820 is an intuitive graphical touch screen interface for users of the xgen security system
Hide thumbs Also See for NXG-1820-EUR:

Advertisement

Low battery – This zone is a wireless device and needs its
battery replaced.

Specifications

Compatibility
xGen Security System
Voltage
12.0-13.5 VDC (provided by panel)
Current
170 mA max with sounder and screen on
max brightness,
40 mA in idle mode
Screen
Resistive touch 3.5" colour TFT LCD screen
Capacity
512 zones, 96 areas, 644 outputs, 256
users
Wiring
xGen 4-wire bus
Code combinations
(There are no invalid code combinations.)
4 digits
10 000
Dimensions (W × H × D)
82 mm x 125 mm x 18 mm
Housing
Opal white with silver frame
Weight
125 g
Operating temperature
0° to 49°C
(32° to 120°F)
Storage temperature
−34° to 60°C
(−30° to 120°F)
Relative humidity
up to 90% noncondensing

Regulatory information

Manufacturer
Placed on the market by:
UTC Fire & Security Americas Corporation, Inc.
3211 Progress Drive, Lincolnton, NC, 28092, USA
Authorized EU manufacturing representative:
UTC Fire & Security B.V.
Kelvinstraat 7, 6003 DH Weert, Netherlands
This equipment has been tested and found to
FCC compliance
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable
protection against harmful interference when the
equipment is operated in a commercial
environment. This equipment generates, uses,
and can radiate radio frequency energy and, if not
installed and used in accordance with the
instruction manual, may cause harmful
interference to radio communications.
You are cautioned that any changes or
modifications not expressly approved by the party
responsible for compliance could void the user's
authority to operate the equipment.
Check local ordinances, this device is not listed
NFPA 72
by an approved test lab to meet NFPA 72 and
therefore may not be sold or installed for use with
a fire system in some localities.
Certification
INCERT
EN 50131-1 System requirements
EN 50131-3 Control and indicating equipment
NXG-1820-EUR: Security Grade 2, Environmental
class II
Tested and certified by ANPI vzw/asbl
Compliance labelling should be removed or
adjusted if non-compliant configurations are
selected.
P/N 230444 • REV D • ISS 08DEC15
European Union
UTC Fire & Security hereby declares that this
directives
device is in compliance with the applicable
requirements and provisions of one or more of the
Directives 1999/5/EC, 2014/30/EU and
2014/35/EU. For more information see:
www.utcfireandsecurity.com or
www.interlogix.com
2012/19/EU (WEEE directive): Products marked
with this symbol cannot be disposed of as
unsorted municipal waste in the European Union.
For proper recycling, return this product to your
local supplier upon the purchase of equivalent
new equipment, or dispose of it at designated
collection points. For more information see:
www.recyclethis.info.

Contact information

www.utcfireandsecurity.com or www.interlogix.com
Customer support
For customer support, see www.utcfssecurityproducts.eu
7 / 7

Advertisement

loading