Advertisement
Emergency panic buttons
Touch the SOS button on the main screen to display the
emergency panic buttons (if enabled by your installation
company):
On this screen touch and hold the appropriate button for 2
seconds to activate Manual Fire Alarm, Manual Medical Alarm,
or Manual Police Alarm.
To silence an audible emergency panic alarm – return to the
home screen, touch the Status button and turn the partition off.
Navigating the Main Menu
Enter a valid PIN code to unlock the screen.
Touch MENU to access the user menu settings. A valid PIN
code is required to view the menus you have access to. A
master user will have more options than a standard user.
Security
Partitions – this menu allows you to view and control each
partition of the security system.
4 / 7
Zones – this menu allows you to view zone status, bypass
zones, activate/deactivate Chime mode for a zone.
Smoke Reset – this button performs a reset on hardwired
smoke detectors connected to your xGen security system. A
reset is required after each fire alarm or fault.
Controls
Action – view and activate actions, shortcut to action
programming.
History
This menu gives you access to the xGen event log. The event
log will show the most recent event. Touch the up arrow to see
an earlier event. Touch the down arrow to see the next event.
Each event is numbered. "1" represents the most recent event.
Up to 1024 events are stored.
Users
Add.Modify – add or modify an existing user's name, PIN code,
profile, or schedule.
View – view an existing user's name, PIN code, profile, or
schedule.
Delete – remove a user from the system.
Status – display a user's status.
Copy – duplicate an existing user(s).
Search by PIN – find a user if you have their full PIN code.
Testing
Siren – test the siren.
Battery – test the battery.
Comm (Communicator) – test the communicator.
Zone Walk – select zones for walk test mode.
Time
Time & Date – set the time and date.
Holiday – see the holidays programmed, shortcut to holiday
programming.
Settings
Keypad – adjust keypad settings:
•
Sound – set keypad volume.
•
Display – set screen brightness, screen saver timeout.
Labels – set up names or messages:
•
Partitions – provide a custom name to partitions.
•
Zones – provide a custom name to zones.
•
Outputs – provide a custom name to outputs.
•
Entry Message – displays during entry delay.
•
Exit Message – displays during exit delay.
•
Reporting
•
Status – view connection status, view panel details.
Clean Me
Disable the NXG-1820E Touch Screen for 20 seconds so it
can be cleaned without activating any features.
P/N 230444 • REV D • ISS 08DEC15
Advertisement
