Precautions - Optoma TX780 User Manual

Precautions

Follow all warnings, precautions and maintenance as recom-
mended in this user's guide to maximize the life of your unit.
Warning- Do not look into the projector's lens when the lamp is
on. The bright light may hurt your eyes.
Warning- To reduce the risk of fire or electric shock, do not expose
this product to rain or moisture.
Warning- Please do not open or disassemble the product as this
may cause electric shock.
Warning- When changing the lamp, please allow unit to cool
down, and follow all changing instructions.
Warning- This product will detect the life of the lamp itself.
Please be sure to change the lamp when it shows warn-
ing messages.
Warning- Reset the "Lamp Reset " function from the On Screen
Display "Lamp Setting" menu after replacing the lamp
module (Refer to page 36).
Warning- When switching the projector off, please ensure the
projector completes its cooling cycle before disconnect-
ing power.
Warning- Turn on the projector first and then the signal sources.
Warning- Do not use lens cap when projector is in operation.
Warning- When the lamp reaches the end of its life, it will burn
out and may make a loud popping sound. If this hap-
pens, the projector will not turn back on until the lamp
module has been replaced. To replace the lamp, follow
the procedures listed under "Replacing the Lamp". (See
page 41)
Usage Notice
3
English