Logo Capture; Security Settings - Optoma TX780 User Manual

User Controls
Componet-p (480p/576p/720p/1080i)
Logo
Use this function to select your desired startup screen. If you change
the setting from one to another, when you exit the OSD menu, the
new setting will take effect on next open.



Logo Capture

Press "Enter" to immediately capture a picture what on the display
screen.

Security Settings

■
English 32
Main source
DVI-D (digital RGB / HDCP)
VGA (analog RGB)
S-video
Video
Optoma: The default startup screen of Optoma projector.
User: Use memorize picture from "Logo Capture" function.
First Time:
1. Press "Enter" to set password.
2. The Password is 4 digits, DEFAULT VALUE is "0000". (first time)
3. Use number buttons on the remote to select your password, and then
press "Enter" key to confirm your selection.
Security Timer: Can be select the time (month/day/hour)

function to set the number of hours the projector can be
used. Once this time has elapsed you will be requested to
enter your password again (Use number buttons on remote.
To change password, follow change password instructions
above).
Change Password:

1. Press "Enter" to input old password.
PIP RULE TABLE
Sub source
DVI-D VGA Componet-p
 
 
 
 
 
S-video Video
  
  
  
  
  