Replacing The Lamp - Optoma TX780 User Manual

Warning: Lamp
compartment is hot!
Allow 30 minutes
to cool down before
changing lamp!
Warning: To
reduce the risk of
personal injury, do not
drop the lamp module
or touch the lamp bulb.
The bulb may shatter
and cause injury if it is
dropped.

Replacing the Lamp

The projector keeps track of the lamp usage. It will show you a
warning message:
When you see this message, change the lamp as soon as pos-
sible. Make sure the projector has cooled down for at least 30
minutes before changing the lamp.
1
Lamp Replacement Procedure:
1. Turn off the power by pressing the Power/Standby button.
2. Allow the projector to cool down for at least 30 minutes.
3. Disconnect the power cord.
4. Push up and remove the cover.
5. Use a screwdriver to remove the 3 screws from the lamp
module.
6. Pull out the lamp module.
To replace the lamp module, reverse the previous steps.
Appendices
2
3
4

English