Siemens CP 243-1 Operating Instructions Manual page 115

Error word
Hex dec
16#003C 60
16#003D 61
16#003E 62
16#0042 66
16#0093 147
16#0094 148
16#0095 149
16#0096 150
16#0097 151
16#0098 152
16#00B0 176
16#00B1 177
16#00B2 178
16#00B3 179
CP 243-1
Operating Instructions, 03/2012, C79000-G8976-C244-02
Description
The configuration has an
invalid gateway address
The configuration has an
invalid value in the keepalive
parameter
No valid configuration
received from memory of the
S7-200 CPU or from
BOOTP/DHCP
The NDB contains syntax
errors in the read/write
requests or length
information.
The BOOTP/DHCP request
failed
The reply of the
BOOTP/DHCP server
contains invalid data
The TCP/IP stack did not
accept the specified
monitoring time (keepalive).
The TCP/IP stack did not
accept the IP address
specified for a client.
The TCP/IP stack did not
accept the specified subnet
mask.
The TCP/IP stack did not
accept the specified gateway
address.
The IDB contains invalid
values.
The CRC check of the IDB
failed.
No administrator name is
specified in the IDB.
The administrator password
check failed or no password
was specified
5.2 Error messages of the CP 243-1
Reaction/remedy
Check the configuration
Check the configuration
Cyclic attempt to obtain
a valid configuration
either from the memory
of the S7-200 CPU or
via a BOOTP/DHCP
server
Check the configuration
Automatic restart
Automatic restart
Automatic restart
Automatic restart
Automatic restart
Automatic restart
Create configuration
with STEP 7 Micro/WIN
32
Create configuration
with STEP 7 Micro/WIN
32
Check the user program
to find out whether
configuration data was
accidentally overwritten
Create configuration
with STEP 7 Micro/WIN
32
Create configuration
with STEP 7 Micro/WIN
32
Diagnostics
Transfer mechanism
Byte offset in the Return value
SM area
(ETHx_)
20, 21 _CTRL
20, 21 _CTRL
20, 21 _CTRL
20, 21 _CTRL
20, 21 _CTRL
20, 21 _CTRL
20, 21 _CTRL
20, 21 _CTRL
20, 21 _CTRL
20, 21 _CTRL
20, 21 _CTRL
20, 21 _CTRL
20, 21 _CTRL
20, 21 _CTRL
115