DSL-2540U ADSL/Ethernet Router with Built-in Switch
User Manual
Advanced
In this menu you can configure advanced settings of the router:
enable the UPnP function
•
define interface groups and allow the router to connect to a private Ethernet line
•
configure a DDNS service
•
add name servers
•
define static routes
•
edit the ADSL connection parameters
•
create rules for remote access to the web-based interface.
•
UPnP
On the Advanced / UPnP page, you can enable and disable the UPnP function.
UPnP is a set of networking protocols designed for automatic configuration of network devices. The
UPnP function performs automatic configuration of the device's parameters for network
applications requiring an incoming connection to the router.
If you want to enable the UPnP function in the router, select the Enabled checkbox and click the
Change button.
If you want to manually specify all parameters needed for network applications, deselect the
Enabled checkbox and click the Change button.
Figure 53. The Advanced / UPnP page.
Page 58 of 86
Configuring via Web-based Interface