Honeywell Excel 50 User Manual page 61

Move the cursor to
 "Default Points" to display I/O points for checking values and manually setting
outputs for testing.
 "Alarm History" to display current alarms. This feature allows the system to be
checked out by a single person opening and closing inputs and then later
reading the alarm buffer to see if they were detected by the controller.
and confirm using the ENTER key.
If "Default Points" has been selected, a listbox similar to Fig. 73 will be
displayed showing all default data-point names and their current values.
To manually set the state/value of output data-points, use the ARROW keys to
move the cursor to the appropriate output data-point from the list box and confirm.
In the case of e.g. analog output data-points, a screen similar to Fig. 74 will be
displayed.
Fig. 74. Manually setting the state/value of analog output data-points
Confirm the displayed value with ENTER, or change the value using the PLUS or
MINUS keys and confirm. In the case of e.g. digital output data-points, a screen
similar to Fig. 75 will be displayed.
Fig. 73. Default data-point names
53
EXCEL 50 MMI - USER GUIDE
EN2B-0222GE51 R0216