Table of Contents
Advertisement
LevelOne WBR-1101TX User Guide
Quick Setup Screen
The Quick Setup screen, like the example below, will be displayed when you first connect.
Quick Setup - Overview
This screen contains all the basic data to make the LevelOne WBR-1101TX operational.
For many users, the default values will be satisfactory, and no changes will be required.
•
Router Most users do not need to change these values.
•
LAN Settings The settings are suitable for most situations, but should be changed as
necessary to suit your LAN environment.
•
WAN (Internet) The settings must be set to match your connection and ISP. The default
values work with most Cable modems and some DSL services. To see full details of the
selected connection method, click the "Configuration" button.
•
Wireless To use the Wireless Access Point:
•
All Wireless devices should have the same SSID. Either the Wireless Access Point or
the Wireless clients can be changed to ensure this.
•
All Wireless devices must have the same settings for WEP (Wired Equivalent Pri-
vacy). By default, WEP on the LevelOne WBR-1101TX is Disabled, so clients also
need to have WEP Disabled.
•
See the Wireless Screen section later in this chapter for details of the LevelOne WBR-
1101TX's Wireless screen.
Figure 5: Quick Setup Screen
14
Advertisement
Table of Contents
