Driver Installation - SMC Networks SMC1233A-TX Quick Start Manual

Ethernet lan card 10/100mbps pci

Hide thumbs Also See for SMC1233A-TX:

Windows 95/98/2000/ME Network

Driver Installation

All versions of Windows may not respond the same. The

typical steps are as follows:

1. Restart your computer. Make sure you have your SMC

Installation CD and Windows 95/98 CD available for driver

installation procedures.

2. "New Hardware Found" window displays and loads "New

Hardware Wizard" program. "New Hardware Wizard" speci-

es the network hardware device (controller) to be installed.

Click "Next".

3. Select "Display a list of drivers in a specic location" so

that you can choose the driver you need. Click "Next".

4. Select the type of device from the list. Click on "Network

Adapters". Click "Next". Click "Have Disk".

5. You will be prompted to "Install from Disk". Insert the SMC

CD containing the drivers and enter the path to the CD-ROM

(e.g. if your CDRom drive is called D: and you have Windows

95, your path will be d:\Drivers\Win95 ) and click "OK". You

can also browse your computer to nd the location. Simply

click on Browse and select driver folder from your CDRom

drive.

6. Screen will display "SMC1233A-TX 10/100Mbps PCI NIC."

Click "OK".

7. Your device will be recognised as a "SMC1233A-TX

10/100Mbps PCI NIC". Click "Next".

You may be prompted to restart your machine after the

installation is complete.

4 English

Table of Contents