Windows Nt 4.0 Installation; First-Time Installation - SMC Networks SMC9462TX User Manual

I
NSTALLING AND

Windows NT 4.0 Installation

Caution: Prior to installing the driver, make sure you have

First-Time Installation

If you have already installed a network card, configured Windows
NT Networking, or configured a network driver, refer to the
procedure entitled "Secondary Installation" on page 3. If Windows
NT is already installed on your computer, proceed to Step 2.
Otherwise, complete a first-time Windows NT installation without
the SMC network card installed. Be sure to also install NT Service
Packet 4 or later.
1. Shut down your PC, install the SMC network card, and attach
the network cable. Restart Windows NT.
2. Double-click on the "My Computer," "Control Panel," and
"Network" icons. The "Network Configuration" window
appears, prompting you to install Windows NT Networking.
Select "Yes." Windows NT invokes the "Network Setup Wizard."
Click on "Next."
3. When prompted to "Search for a Network Adapter," click on
"Select from List."
N
upgraded to NT Service Pack 4 or later.
C
C
ONFIGURING
ETWORK
HAPTER
D
RIVERS
2
2-1