Uniden UM380 Owner's Manual page 21

the radio is in. For example, if you turn on your radio and it is connected to a GPS unit but
the GPS is not sending data, the radio displays Input GPS. At the 30 minute mark with no GPS
data input from the GPS unit, the radio display changes to Input Position.
Timeframe
From power on to
30 minutes
At 30-minute mark
after power on
#
note: if the
radio receives
gps data by the
30-minute mark,
the next level of
displays apply
The radio receives correct GPS data either through manual input or GPS.
Up to 4 hours after
receiving valid
GPS data
At 4 hour mark
after receiving
valid GPS data
Over 23.5 hours
after receiving
valid GPS data
* If the radio displays an error condition, the radio cannot receive valid GPS data; check
the GPS
#
nOte: Be certain any manually-entered position is correct. if you enter the wrong position
and then make a DsC distress call, you will be telling the arrows to adjust each of the values
in turn.
Press and hold -
Setup
For Sales Information Please Contact RoadTrucker Inc (www.RoadTrucker.com)
8312 Sidbury Rd.; Wilmington, NC 28411 - (800) 507-0482 / (910) 686-4281
Is GPS
Display
Connected?
Yes GPS OK
Yes Input GPS
No None
Yes GPS OK
Yes Input Position
Input Position
No
Yes Check GPS
No None
Yes Input Position
None Input Position
Yes Input Position
None Input Position
Use the up and down arrows
to adjust each of the values
GPS Setup
Alert Condition (Notes)
None Normal
None Error *
None Normal
None Normal
Yes Error * (continuous
display)
Yes Normal (continuous
display)
None Error
None Normal
Yes Error * (continuous
display)
None Normal (continuous
display)
None Error * (Lost GPS data;
continuous display)
None Normal (Lost GPS data;
continuous display)
--/-- 11:22U
o
---
in turn.
o
35 40.610 N
o
139 46. 564 E
Position Set
Back[CLR] Forward[ENT]
16
--.- KT
English
15