Basic Working Techniques; Transport And Storage - Husqvarna CS 10 Operator's Manual

Basic working techniques

• This machine is only intended for use together with
Husqvarna WS 440 HF + PP 440 HF or WS 482 HF + PP
480 HF.
• This machine is designed for and intended for sawing
concrete, brick and different stone materials. All other use
is improper.
• The machine is intended for use in industrial applications
by experienced operators.
• Never use the machine if you are fatigued, while under the
influence of alcohol or drugs, medication or anything that
could affect your vision, alertness, coordination or
judgement.
• Keep all parts in good working order and ensure that all
fixtures are properly tightened.
• Check that the guards are mounted correctly and do not
show any signs of damage. Never cut without using the
guard.
• Only use wire recommended by the manufacturer. Ask
your dealer for help in choosing the right product.
• Never use worn or damaged wire.
• A used wire must always be run in the same direction, as
it was previously run in order to prevent unnecessary
wear.
• Never cut without using the cooling water. A poorly cooled
wire can result in the segments overheating, which results
in greater wear. In the worst case scenario, segments can
come loose from the wire and injure persons close to the
saw.
• Clearly mark out all cuts to be made before you start
sawing, plan these so they can be carried out without
danger to persons or the machine.
• Firmly secure or anchor concrete blocks before cutting.
The heavy weight of cut material can cause both
extensive damage to the machine and serious personal
injury if it cannot be moved under controlled conditions.
• Never leave the machine unsupervised with the motor
running.
• Never saw in such a way that you cannot easily reach the
emergency stop on the remote control or on the power
pack. See power pack manual.
• Observe care when lifting. You are handling heavy parts,
which imply the risk of pinch injuries or other injuries.

Transport and storage

• Always switch of the power pack and pull out the electric
cable before moving the equipment.
• Secure the equipment during transportation in order to
avoid transport damage and accidents.
• Store the equipment in a lockable area so that it is out of
reach of children and unauthorized persons.
OPERATING
– 17
English