Lan Port; Dhcp Table - LevelOne FBR-1100TX User Manual

Hide thumbs Also See for FBR-1100TX:
Table of Contents

Advertisement

LevelOne Broadband Router User Guide

LAN Port

Physical Ad-
dress
IP Address
Network Mask
DHCP Server

DHCP Table

This table will be empty unless the DHCP Server function is being
used. If it is being used, this table lists the devices on the local LAN
which have been allocated IP Addresses by the DHCP server function.
Only IP Addresses in use will be listed.
IP Address
Physical Ad-
dress
Status
30
The "Hardware" address of this device, as
seen by other devices on the Internal LAN.
The IP Address of this device, as seen by other
devices on the Internal LAN.
The Network Mask (Subnet Mask) for the IP
Address above.
This shows the status of the DHCP Server
function. The value will be "Enabled" or "Dis-
abled".
The IP Address which has been allocated by
the DHCP server to the other device.
The Physical Address (Hardware Address) of
the device which has been allocated a IP
Address.
Possible Status values are "Leased" (the IP
Address is allocated to the device shown) or
"Reserved" (the IP Address is not available).

Advertisement

Table of Contents
loading

Table of Contents