Playing Music And Turning Off The Device; Turning Power On And Off; To Search For Specific Parts During Play; To Change Tracks During Play - Samsung YP-U1 Service Manual

Playing Music and Turning Off the Device

I

Turning Power On and Off

Power On : Press the button to turn on the power.
Make sure the player is fully charged and the earphones are connected.
Power Off : Press and hold the
I
Playing Music (Power On)
Press the button.
Playback starts.
I
Pausing Music (Power Off)
Press the button to pause playback.
If no buttons are pressed within 10 seconds (changes depending on set-
tings),
the player automatically powers off.
While in Pause mode, press the
I

Adjusting the Volume

Press , to adjust the volume from 00 to 30.
N N o o t t e e
- If the file name is not displayed correctly, move to [Settings]
[ID3-Tag] and then change the language setting.
N
- WMA files can only be played as music files with a compression rate of 48Kbps-
192Kbps.
- The power off time can be set in the menu.

HOLD Function

In Hold mode, all buttons are disabled.
Slide the switch in the direction of the arrow.
When the button is pressed, the "

Recording Voice

To move to other modes from the Voice mode,
refer to "Changing Mode".
1
Press and hold the REC button to start voice recording.
2
Press the REC button again to stop the recording and save the voice
file.
N N o o t t e e
- The files are recorded in the order of V001,V002......, and saved as WAV file in the
VOICE folder after recording.
- If the Memory is full, Voice Recording is stopped automatically.
3-2
button to turn off the power.
button again to resume playback.
[Language]
HOLD!" message will appear on the display.
Searching for Music/Voice Files
I

To search for specific parts during play

Press and hold , during playback to search for the part you want
to listen to.
Release , to resume play normally.
I

To change tracks during play

Press briefly during playback to play the next track.
Press briefly within 5 seconds after playback starts, to move to and
play the previous track. Press
current track from the beginning.
I

To change tracks when stopped

Press , in stop mode to move to the previous/next track.
N o t e
N o t e
- VBR(Variable Bit Rate) file: A file that constantly changes the compression rate accord-
ing to the type of sounds, such as their pitch, in the file.
- In the case of a VBR file, you cannot move to and play the previous track even if you
press within 5 seconds after playback starts.
- Files that were downloaded in MP2 or MP1 and had their file extension changed to
MP3 may not play.

Loop Repeating

I

Starting Point

While playing music files, press the A B button
briefly at the beginning of the loop you want to set.
A appears in the display.
I

Ending Point

Press the A B button briefly again to set the
end of the loop.
A B appears in the display.
The loop is played repeatedly.
Press the A B button briefly to cancel the loop.
N o t e
N o t e
- Loop Repeat is automatically released if you Speed Search with
briefly after five seconds to play the
, .
Samsung Electronics