Playing Music And Turning Off The Device; Recording Mp3S; Turning Power On And Off; Adjusting The Volume - Samsung YP-C1 Service Manual

Playing Music and Turning Off the Device

I

Turning Power On and Off

Power On : Press the button to turn on the power.
Power Off : Press and hold the
I Playing Music (Power On)
Press the button.
Playback starts.
I Pausing Music (Power Off)
Press the button to pause playback.
If no buttons are pressed within 10 seconds (changes depending on settings),
the player automatically powers off.
While in Pause mode, press the
I

Adjusting the Volume

Press , to adjust the volume from 00 to 30.
N N N N o o o o t t t t e e e e
- If the file name is not displayed correctly, move to [Settings]
then change the language setting. When the language setting changes, the language in the
menu screen changes accordingly.
- WMA files can only be played as music files with a compression rate of 48Kbps-192Kbps.
- The power off time can be set in the menu.

HOLD Function

In Hold mode, all buttons are disabled.
Slide the switch in the direction of the arrow.
When the button is pressed, the " HOLD!" message will appear on the display.

Recording Voice

To move to other modes from the Voice mode,
refer to "Changing Mode".
1
Press and hold the REC button to start voice recording.
2
Press the REC button again to stop the recording and save the voice file.
N N N N o o o o t t t t e e e e
- The files are recorded in the order of V001,V002......,
and saved as WAV file in the VOICE folder after recording.
- If the Memory is full, Voice Recording is stopped automatically.
- Voice Recording does not work in FM Mode or when the Line In cable is connected.
FM Recording
1
Press and hold the REC button during FM reception.
Recording of the currently transmitted FM broadcast begins.
2
Press the REC button again.
A file is created and the recording stops.
Files are recording in the order F001, F002, F003...and saved as MP3 files in FM_ENC
folder.
N N o o t t i i c c e e
N N o o t t i i c c e e
- If the battery is not sufficiently charged, the player will not completely record the file.
3-2
button to turn off the power.
button again to resume playback.
[Language] [Menu] and

Recording MP3s

To move to other modes from LINE_ENC mode,
refer to "Changing Mode".
1
Connect the Audio Output port on the external audio source
(or the Line Out port) to the ENC port on the device with the Line cable.
2
Press and hold the REC button to start MP3 recording.
If the button is pressed, recording is paused and if the
the recording resumes.
3
If the REC button is pressed during recording, the recording stops and an
MP3 file is created.
The files are recorded in the order of L001, L002....
and saved as MP3 file in LINE_REC folder after recording.
N N o o t t e e
N N o o t t e e
- Bit Rates can be set within the range of 32Kbps~128Kbps.
- Volume can be adjusted while monitoring the recording.
N N o o t t i i c c e e
N N o o t t i i c c e e
- Do not disconnect the Line cable during recording.
- If the battery is not sufficiently charged, the player will not completely record the file.
- Adjust the volume of the external audio source to a suitable level and record it.
If the volume level is too high, the sound quality may be poor.
Searching for Music/Voice Files
To search for specific parts during play
¤ ¤
Press and hold , during playback to search for the part you want to lis-
ten to.
Release , to resume play normally.
To change tracks during play
¤ ¤
Press briefly during playback to play the next track.
Press briefly within 5 seconds after playback starts, to move to and play
the previous track. Press briefly after five seconds to play the current track
from the beginning.
To change tracks when stopped
¤ ¤
Press , in stop mode to move to the previous/next track.
N N o o t t e e
N N o o t t e e
- VBR(Variable Bit Rate) file: A file that constantly changes the compression rate according
to the type of sounds, such as their pitch, in the file.
- In the case of a VBR file, you cannot move to and play the previous track even if you
press within 5 seconds after playback starts.
- Files that were downloaded in MP2 or MP1 and had their file extension changed to
MP3 may not play.
button is pressed again,
Samsung Electronics