Sound And Illumination Effects - Panasonic SC-AKX640 Owner's Manual

█
Selecting a preset station
Press the numeric buttons, [2] or [6] to select
the preset station.
Using the main unit
1
Press [TUNE MODE] to select "PRESET".
2
Press [2/3] or [5/6] to select the preset
station.
Improving the sound quality
When "FM" is selected
1
Press [PLAY MENU] to select "FM MODE".
2
Press [Y, U] to select "MONO" and then press
[OK].
To cancel, select "STEREO".
"MONO" is also canceled when you change the
frequency.
To memorize the setting
Continue with step two of "Manual presetting".
When "AM" is selected
1
Press [PLAY MENU] to select "B.PROOF".
2
Press [Y, U] to select the setting that provides the
best reception and then press [OK].
Checking the signal status
When "FM" is selected
Press [DISPLAY].
FM – – – – The FM signal is weak.
The system is not tuned in to a station.
FM ST The FM signal is in stereo.
FM MONO "MONO" is selected as the "FM MODE".
The FM signal is in monaural.
FM allocation setting
By main unit only
This system can also receive FM broadcasts allocated in
0.1 MHz steps.
1
Press [RADIO/AUX] to select "FM" or "AM".
2
Press and hold [RADIO/AUX].
After a few seconds, the display panel shows the current
minimum radio frequency. Release the button when the
minimum frequency changes.
• To go back to the initial setting, re-do the above steps.
• Preset frequencies are erased after you change the
setting.

Sound and illumination effects

Sound effects
Preset EQ
1
Press [EQ] (main unit: [LOCAL EQ]) to select
"PRESET EQ".
2
Press [R, T] to select the desired preset EQ
setting and then press [OK].
Or turn [MULTI CONTROL] to select the desired
preset EQ setting.
Manual EQ
1
Press [EQ] (main unit: [LOCAL EQ]) to select
"MANUAL EQ".
2
Press [R, T] to select the sound effect.
Or turn [MULTI CONTROL] to select the sound effect.
3
Press [Y, U] to select the setting and then press
[OK].
Or press [2/3] or [5/6] to select the
setting.
BASS/MID/TREBLE –4 to +4
SURROUND "ON SURROUND" or
"OFF SURROUND"
D.Bass
1
Press [D.BASS] to select "D.BASS LEVEL" or
"D.BASS BEAT".
To cancel, select "OFF D.BASS".
2
Press [R, T] to select the setting and then press
[OK].
Or turn [MULTI CONTROL] to select the setting.
Note:
D.BASS BEAT: This function emphasizes the attack level of
the drumbeat and produces a punchy sound. Depending on
the track, the effect may be small.
Illumination effects
You can change the illumination effect on the system.
Press [ILLUMINATION] to select the desired effect.
COLOR Illuminate in one color.
AUTO Illuminate in one color. The color changes
automatically.
OFF Cancel the effect.
You can also press [R, T] to select the next or previous
effect.
Using the main unit
1
Press and hold [–ILLUMINATION].
2
Turn [MULTI CONTROL] to select the setting.
11