Bosch e103022 Installation Instructions Manual page 14

11
12
13
12
IMPORTANT: Do not allow leg
levelers to scratch or mark floor.
Place hands where pictured to
push into place. As you slide
the unit in, guide the water line
and drain hose toward the sink,
and electric line beneath the
unit toward the junction box at
the front right side. Ensure that
the excess drain hose is pushed
through to the cabinet housing
the sink. Units are typically
positioned so that the door is
flush with cabinet door and
drawer fronts. For optimal noise
reduction, ensure side strips are
in contact with cabinet.
Attach the strain relief (not
included) to the strain relief plate.
The two screws on the back
of the strain relief should be
positioned as shown to prevent
interferences during assembly.
Tighten the strain relief lock nut
to prevent the strain relief from
turning.
Pass wires through strain relief
and plate. Tighten clamp around
wires, oriented as shown.
Bending the electrical cable as
shown will ease installation of the
strain relief plate.