Bosch e103022 Installation Instructions Manual page 10

1
2
Remove the toe panel(s) (Part H or Parts I and J depending on model) (1)
from the unit and retain for attachment to the front at a later time. Loosen
the leg levelers slightly. Remove junction box cover and retain for later use
(2). Discard the small piece of protective styrofoam.
8
90°
1
24" (600 mm) with side
strips removed.
Minimum hole size for drain
hose is 1 1/2" (38.1 mm).
Minimum hole size if drain
hose and inlet hose are
through same hole is 2"
(50.8 mm).
2