Samsung Galaxy S Blaze 4G User Manual page 231

Press and then tap
1.
Location and security.
Tap Set up screen lock
2.
Read the instructions then tap Next.
3.
Review the onscreen animation procedure for drawing a
4.
pattern and tap Next when you are ready to draw a pattern.
Draw your pattern by touching your first on-screen point.
5.
Then, without removing your finger from the screen, drag
your finger over adjacent points until the gray trace line
overlaps each point and they are highlighted with a green
circle.
When you have connected at least four dots in a vertical,
6.
horizontal or diagonal direction, lift your finger from the
screen and tap Continue.
Confirm the new pattern by redrawing it and then tapping
7.
Confirm. The Unlock pattern is set.
(Settings)
Pattern.
Changing the Screen Lock Pattern
This feature allows you to change the previously stored unlock
pattern and update it if necessary. This process is similar to
changing your password from time to time.
Press
1.
Location and security.
Tap Change screen lock.
2.
Retrace your current pattern on the screen.
3.
Tap Pattern and repeat steps 3 - 7 from the previous
4.
section.
Using a Visible Pattern
When enabled, this feature displays the onscreen lock grid that is
used to unlock the phone.
Using Tactile Feedback
When enabled, the User tactile feedback option, you will feel
vibration as feedback while drawing the pattern, using a PIN or
password lock.
and then tap (Settings)
Changing Your Settings 227