Samsung Galaxy S Blaze 4G User Manual page 214

Wi-Fi Direct Settings
You can configure your device to connect directly with other Wi-Fi
capable devices. This is an easy way to transfer data between
devices. These devices must be enabled for
Wi-Fi direct communication. This connection is direct and not via
a hotspot or WAP.
Note: Activating this feature will disconnect your current Wi-Fi network
connection.
Press
1.
Wireless and network
Tap Wi-Fi Direct. A check mark displayed next to the
2.
feature indicating it is enabled. Your phone will begin to
search for other devices enabled with Wi-Fi direct
connections.
After scan, tap a device name to begin the connection
3.
process to another Wi-Fi Direct compatible device.
Note: The target device must also have Wi-Fi Direct service active and
running before it can be detected by your device.
Tap Connect. The direct connection is then established.
4.
210
and then tap (Settings)
Wi-Fi Direct settings.
When prompted to complete the connection, tap OK. The
5.
status field now reads "Connected" and your connected
device is listed within the Wi-Fi Direct devices listing.
Wi-Fi Calling
You can configure your device to make and receive calls over an
active Wi-Fi connection. Wi-Fi Calling is an excellent solution for
coverage issues in and around the home or wherever cellular
coverage is limited. Minutes used while connected to the Wi-Fi
network count against available rate plan minutes. For more
information, refer to "Wi-Fi Calling" on page 66.
Ensure that the Wi-Fi connected icon displays on the
1.
status bar.
Press
2.
Wireless and network
and then tap (Settings)
Wi-Fi Calling.